FEATURES :

2 to 4 Door Access Control Panel :
iTDC is able to control up to 4 doors. It is provided with a board only or full packages including back-up battery, power supply and enclosure. LCD and keypad for front programming are optional. (EIO8/8 required to control 2 and 4 doors)

4 External Reader Ports :
Provides 4 external reader ports for biometric readers and proximity readers (26 bit Wiegand, 8 bit burst for 125kHz RF Reader and 34 bit Wiegand, 8 bit burst for 13.56 MHz Mifare Card Reader)

Store up to 10,000 IDs and 29,500 Events :
iTDC allows you to register 1,000 to 20,000 ID numbers and it can keep 20,000 to 29,5000 transactions in its buffer. Those are user programmable.

Stand-alone or RS-422 Networked Operation :
iTDC can be used as not only a Stand-alone System without a dedicated PC or PC-controlled system in a single controller environment, but also a Network System communicating via RS-422 (addressable up to 256 devices) or TCP/IP protocol in a multi-controller environment. All control setting values such as ID numbers, input and output configurations, real time clock and time schedule can be downloaded/uploaded from/to the host computer and all event transaction data stored in the buffer reports to the host computer. iTDC is a front- programmable by optional LCD and Keypad

Support TCP/IP communication using external TCP/IP module (as optional) :
We provides a TCP/IP module (as optional) to be internally installed in the iTDC.

Independent 7 Inputs, 4 Relay outputs and 3 TTL outputs : Independent 7 input ports can be connected with various devices such as exit button, door contact, PIR sensor, fire sensor signals, and so on. Four Form FORM-C relay outputs are built-in with anti-magnetic protection and three TTL outputs are provided for various applications such as to activate Auto-dialer (optional) and to control other devices.

I/O Expansion Board (EIO88) to expand additional 8 inputs and 8 outputs :
EIO88 I/O Expansion Board provides additional 8 inputs and 8 outputs to iTDC

Retain the User ID and Event Data in case of power failure.

15 Time Schedules and 10 Holiday Schedules :

You can define 15 time schedule (up to 10 time interval per schedule) and 10 holiday schedule (up to 100 holidays per schedule) for each individual or a group of individuals and specify who has the right to access a particular door (terminal) under multi-device environment where multi doors are controlled by different devices

Anti-Pass-back Feature :
When an extra proximity reader for exit is connected, you can set Anti-passback mode that will not allow any card to re-enter unless it has been used to exit. This feature prevents a user from entering, sliding his or her card under the door to another individual, and allowing that unauthorized individual to enter.

Front System Direct Program via LCD with Keypad (optional)

Sensor Type Selectable (NC or NO) : iTDC supports both NC and NO type sensors

21 LED Indicators & one Buzzer for monitoring System Status :

21 LEDs and 1 buzzer indicates system operating status at real time. (top)

Options :